loop circuit
英 [luːp ˈsɜːkɪt]
美 [luːp ˈsɜːrkɪt]
环路；环形电路；闭合回路
双语例句
- Most short-path selection of many allocation loop circuit in actual allocation
实际配送中多个配送点闭回路最短路径的选取 - The principles, features, and process flow of the loop circuit drying plants were simply presented, their application examples were described and they were compared with other drying plants.
简要介绍了闭路循环干燥装置的原理、特点和工艺流程。文中列举了其工业应用实例，并与其他干燥设备进行了对比。 - Simultaneously, a loop circuit is formed by a lead line being connected with an outer connecting power and a warning unit and the warning is achieved.
同时，通过导线接通外接电源，报警器，形成一个回路，实现报警。 - Equivalent Model of Electromagnetic Wave Radiated from Corona Discharge between Needle-Plate Electrodes in Loop Circuit
针&板电极电晕放电辐射电磁波的等效模型双极集成电路单元隔离 - It is shown that what affect the amplitude of pre-pulse voltage are the grounding inductance and the frequency of the charging loop circuit, which is determined by the secondary coil inductance of transformer and the capacitance of PFL.
研究表明由变压器副边电感和脉冲形成线电容构成的回路充电频率和接地电感的大小是影响预脉冲电压幅值的主要因素。 - Based on graph theory and TTRS theory, The concepts of mate tree and loop circuit are put forward, and the properties of mate tree and the generation rules of loop circuit are discussed.
基于图论和TTRS理论提出配合树和回路概念，给出配合树的性质和回路的生成规则； - This paper introduces: an ultrasonic beam scanning technique controlled by a closed loop circuit electronic servo mechanism.
本文介绍一种由闭环电路电子伺服机构控制的超声束扫描技术，换能器在其永久磁铁受到可控交变磁场影响时摆动。 - Furthermore, the novel digital closed loop was brought forward in the closed loop resonant circuit, the digital circuits and digital signal processing methods were used to realize the traditional AGC ( auto gain control) in the closed loop circuit.
提出谐振电路的数字式闭环设计新思想，利用数字电路及其信号处理方法实现传统的闭环增益控制（AGC，AutoGainControl）。 - This paper introduces a digital phase-locked loop circuit used as position measurement device's core which adopts Lattice corporation's in-system programmable chip, analyses digital phase-locked loop's basis principle and realization.
本文介绍了一种采用LATTICE公司的在系统可编程芯片设计的用于位置检测装置核心部件的数字锁相环电路，分析了数字锁相环的基本原理及实现过程。 - Based on the Fault Tree Analysis ( FTA), the main loop circuit of electrical life-test device is studied and its corresponding fault tree constructed.
在故障树分析理论的基础上，对电寿命试验设备的主回路进行了分析，并建立相应的故障树。 - The main loop circuit, the micro-processor, the interface circuit and the power unit of the servo system were introduced in hardware design.
在硬件部分，介绍了系统的主回路、微处理器、功率模块，以及接口电路； - The loop circuit controlling of current, voltage and speed of welding can be realized in welding process.
在焊接过程中，对电弧电压、焊接电流、焊接速度实现闭环控制。 - And the new circuit structure for improving the locking range, that is, injection-locked phase-locked loop circuit ( ILPLL) is introduced into the millimeter wave circuit.
在此基础上，结合注入锁定和环路锁相原理，在毫米波频率源中引入了一种新型的展宽带宽的电路结构――环路注入锁定锁相电路（ILPLL）。 - Based on mate tree, the generation scheme of loop circuit and 3D assembly tolerance chains is put forth.
基于配合树，给出了的回路和三维装配公差链的生成方法。 - The implementation and debugging method of an adaptive loop circuit
一种自适应环路的实现及调试方法 - First, the basic principle of the phase-locked loop circuit is introduced in this paper. Second, the discussion and improvement of the design of the low passed filter ( LPF) is presented.
本论文首先对锁相环路的基本原理进行了介绍，然后对环路滤波器（LPF）的设计作了探讨和改进； - Lastly, we arrive a conclusion on test condition of relay's electrical life-test device when simulating motor load. This kind of test condition includes the voltage across relay's contacts and current through its loop circuit.
最后总结得出继电器电寿命试验设备模拟电动机负载时的试验条件，其中包括继电器的触点电压和回路电流条件。 - Application of Phase-lock Loop Circuit in Nonstandard Video Signal Acquisition System
倍频锁相电路在非标准图像采集系统中的应用 - In the outer control loop, a proportional integral voltage controller is used to regulate the CD-link voltage. A phase lock loop circuit is adopted to generate a sinusoidal waveform in phase with main voltage to achieve power factor correction.
控制电路采用两个控制回路：外部控制回路用比例积分电压控制器调整直流环节电压，采用相位闭环电路产生与电源电压同相的正弦波形来实现功率因数补偿。 - The method is to judge whether a system is stable by analyzing the amplification of loop circuit based on amplitude frequency response and phase frequency or not.
这种方法是将电路的幅频特性和相频特性曲线结合起来对环路增益进行分析，以此作为判断系统是否稳定的依据。 - This article discussed the relationship of the inductive current, the lever of electromagnetic field, and the loop circuit impedance by some test date concisely.
文章通过理论分析和试验数据，对感应电流与电磁场幅度及环路阻抗的关系进行了探讨。 - The hardware design includes phase-locked loop circuit design and the FM circuit design.
硬件设计主要分为锁相环设计以及调频电路设计。 - While introducing the phase-locked loop circuit design, equipment of PFD, charge pump, variable loop filter, divider circuit and out of lock detection circuit design are also given detailed descriptions.
锁相环设计又详细介绍了鉴频鉴相器、电荷泵、可变环路滤波器、分频电路以及失锁检测电路的设计。 - The use of phase-locked loop circuit to ensure that the FFT transform to meet the demands of synchronous sampling, it can reduce the leakage of frequency spectrum.
锁相环电路的使用则保证了FFT变换对采样同步性的要求，减少了频谱泄露。 - Charge pump and VCO are two core modules of the charge pump phase-locked loop circuit.
电荷泵和压控振荡器是电荷泵锁相环的两个核心电路模块。 - The D flip-flop loop-based approach adopts a loop circuit formed by multiple shift registers and inverters, generating multiple square-wave signals of equal time-delay/ initial phase differences, which are then reshaped to sine waves via low-pass filtering.
基于D触发器环路的相控阵信号发生技术采用多个移位寄存器和反相器构成的环路，生成多路延时／初始相位等差的方波信号，再经低通滤波整形为正弦波。 - The design of power in accordance with ordinary laboratory user requirements, parameters of the proposed based on pulse width modulation ( PWM) high efficiency, low power switch power dc voltage converter design method, adopts full bridge, step-down, mainly push-pull loop circuit topology.
本设计依照普通实验室用户对电源参数的要求，提出了一种基于脉冲宽度调制（PWM）高效率、低功耗开关电源直流电压转换器的设计方法，采用全桥、降压、推挽回路为主电路拓扑。 - The new method simplifies the detection circuit as well as improves response speed of the detection algorithm for it does not require phase-locked loop circuit.
该方法不需要锁相环电路，简化了检测电路结构，且提高了检测算法的响应速度。 - After every modules of PLL are analyzed, the Z-domain of phase-locked loop circuit is analyzed to ensure the correctness of the design.
在分析了锁相环各个模块电路特性的基础上，分析了电路的Z域模型，从理论上保证了锁相环电路构架设计的正确性。 - The circuits are designed, including power circuit, signal conditioning circuit, data-storing circuit, serial interface circuit, display circuit and current loop circuit.
电路设计。包括电源电路、信号调理电路、数据存储电路、串口电路、显示电路和电流环电路。